Herunterladen Inhalt Inhalt Diese Seite drucken

NATUREL ZIL80LEDC Installationsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
EN Instructions for assembly
8. Now you can hang the mirror. The holes in the frame of the mirror goes on the screws and hang the mirror slowly few millimetres down.
The mirror is now installed!
For the models marked ZIL80LEDC
The mirror is not equipped with any control. It is turned on/off through the switch of the light located in the house. Two-button switch is recommen-
ded for individual choice of lighting in the bathroom.
For models marked ZIL80LEDSEC
The mirror is equipped with a control – touch switch. It is turned on/off by touching the centre of the sensor. It is possible to set the color of lighting
with these models (color temperature or chromaticity) by holding your finger on the sensor. Color temperature ranges from 2700K (warm white) to
6000K (cool white) or the other way around. Color temperature is automatically saved to the memory. When turning on the mirror next time, the
saved color temperature will be used.
12
Use
8. EU certificate of conformity
Certificate of conformity is issued for this product according to the authorized regulations.
The content of the issued ES certificate of conformity
Description of the product: Bathroom light with illuminated mirror
Name of the product: LED cosmetic mirror for bathrooms
Models of the product: ZIL80LEDC / ZIL80LEDSEC
The product is in accordance with the following regulations:
- Government Regulation no. 117/2016 Sb. on electromagnetic compatibility of the product while being supplied to market
- Government Regulation no. 118/2016 Sb. on conformity of electric devices determined for the use within the voltage while being supplied to market
and harmonized regulations:
ČSN EN 60598-1-ed.6 (360600) Lights – Part 1: General requirements and tests.
ČSN EN 60598-1-ed.6:2015/Revision1 (360600) Lights – Part 1: General requirements and tests.
ČSN EN 60598-2-1 (360600) Lights – Part 2: Special requirements – Section 1: Stationary lights.
Last two digits of the year when the CE mark was placed on the product: 17
The product is marked by:
SIKO KOUPELNY a.s.
Skorkovská 1310, 198 00 Praha 9
EN EU certificate of conformity
IČ: 26065801
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Zil80ledsec

Inhaltsverzeichnis