Refilling; Emptying The Blender Jar - hanseatic HBL800-15SD Gebrauchsanleitung

Page EN-16 Operation
Blending
0
P
1. Turn the adjustment dial (8) to
the "0" position.
2. Completely unwind the mains
cord (9).
3. Insert the mains plug into a
properly installed socket.
4. Turn the adjustment dial (8) to
the right level.
5. Repeat the process until the
food in the blender jar is of the
desired consistency.
In doing so, operate the appli-
ance for a maximum of 2 min-
utes.

Refilling

If required you can refill ingredi-
ents or liquids through the refilling
opening in the lid (2).
1. Stop the blending.
2. Remove the refilling cup (1).
3. Pour in the ingredients or liq-
uid.
4. Reinsert the refilling cup.
Emptying the blender
jar
(8)
The blender jar (4) is not suitable
1
for storing blended ingredients.
2
Decant the blended ingredients
quickly.
1. Pull the mains plug out of the
2. Remove the lid (2).
3. Remove the blender jar along
4. Decant the blended ingredi-
solidify (see "Cleaning and main-
tenance" on page EN-17).
socket.
with the blade assembly (6)
from the motor block (7).
ents into a drinking or storage
container.
Clean the blender jar and
blade assembly before the
blended ingredients can