Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Schematic diagram of the wiring position of the mainboard cable
Note: 1. The control box is compatible with 12V/24V power adapter.
*
2. When replacing the laser module with different power, you need to replace the supporting power adapter, otherwise the laser module will be damaged!
3. After installing the connecting wire, it is necessary to tie the wire to the steel wire of the X-axis and the fixed bracket with a cable tie, otherwise the connecting wire is too
long and may scratch the engraved object below.
4.For users whose existing laser module has a 4PIN or 3PIN power connector, we provide 5PIN to 4PIN and 5PIN to 3PIN adapter cables, please select the corresponding
adapter cable according to the actual situation.
2
3
7
4
5
1
Werbung
Inhaltsverzeichnis
