Superior Electronics SMART iCM003 Bedienungsanleitung Seite 6

B.2 Cable Mode
As an alternative, should a cable connection (Ethernet) be available, press the "+" at
the top-right, and/or "Add Device" in the centre of the screen. Select "Camera & Lock"
from the left column and "Smart Camera (Wi-Fi)" from the list that opens.
In the new screen, click on "QR Code" in the upper-right corner, then on "Cable".
Check that the camera is making the acoustic signals described under point "3.2 –
Installation of the Camera" before pressing "Next". (ATTENTION: If the device does
not make any sound, repeat the reset procedure (using the "RESET" button) indicated
under point "A" before proceeding).
Wait for the configuration to be completed successfully and then press "Finish".
Should you encounter difficulties even with the alternative modes, contact "Superior
Electronics" support at the e-mail address: info@superior-electronics.com
4. FUNCTIONS
LIVE VIDEO – Once the camera has been connected, simply click on its icon in the "Smart
Life®" application to access live video viewing, which is available in both high definition
(HD) and the standard format (SD).
RECORDING – By pressing the button with the shape of a video camera inside the App,
videos are recorded and saved on your smartphone (in this case it will be necessary to
accept the notification that will appear on the screen, allowing the App to access the
gallery).
For photos, on the other hand, press the camera button to memorise photos taken by the
"Security" camera on your smartphone.
To view the images recorded in this way, simply press the arrows in the lower-right
corner to open the complete menu and then click "Gallery".
To view the videos saved on the microSD card, on the other hand, select the "Playback"
button from the complete menu.
To return to live video, press the arrow at the top-left.
MOVEMENT – It is possible to move the camera's field of vision manually, using the
cursor of the "Direction" section, which is reached by pressing the arrows in the lower-
right, or the "Motion Tracking" function of the App's "Features" menu can be used to
change the viewing field automatically.
MICROPHONE – The microphone function can be activated by pressing the microphone
icon. Using the smartphone as a receiver, the voice will be produced by the "Security"
camera.
NIGHT MODE – The night mode is activated/deactivated automatically, to ensure
optimal vision of the surrounding environment at all times, unless a different selection is
made in the "Basic Settings" ("Nightvision Mode").
If a movement is detected in the night mode, and the setting "Motion Detection" is
activated, then the LEDs go on to light the area in question, after which they can be
turned off manually from the App by pressing the arrows to the lower-right and then the
"Light" icon on the "Features" menu.
They switch off automatically after some minutes.