Temperature Settings - Sharp SJ-TE435H4W-EU Bedienungsanleitung

CHAPTER -3: USING YOUR FRIDGE FREEZER
• Cool Drink Mode can be cancelled by following pressing the
for five seconds.
During this mode:
• When drink cool and child lock modes are active, the child lock mode must be cancelled in order to stop the
alarm sound
• While using this mode, you must regularly check the temperature of the bottles. When the bottles are cool
enough, you must take them out of the appliance.
• Bottles can explode if left in the appliance for too long with drink cool mode active.
Screen Saver Mode
Purpose
This mode saves energy by switching off all control panel lighting when the panel is left inactive.
How to Use
• Screen saver mode will be activated automatically after
30 seconds.
• If you press any key while the lighting of the control panel
is off, the current machine settings will reappear on the
display to let you make any change you wish.
• If you do not cancel the screen saving mode or press any
key for 30 seconds, control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, first of all, you need to press any key to activate the keys and then press
and hold the Mode button "
• To reactivate screen saving mode, press and hold the mode button "
The Child Lock Function
Purpose
Child lock can be activated to prevent any accidental or
unintentional changes being made to the appliance settings.
Activating Child Lock
Press and hold child lock button
Cancelling Child Lock
Press and child lock button
Door Open Alarm Function
If either the fridge or freezer door is left open for more than 2 minutes, the appliance will beep.

Temperature Settings

Freezer Temperature Settings
• Press icon (#9 on control panel diagram), until the
'Freezer temperature setting' is selected (#1).
• Once Freezer temperature setting is selected, the
temperature will flash.
• Users can then use the up or down arrow (
set the temperature (-16, -18, -20, -22, -24°C and Super
Freeze Mode).
• If Super Freeze mode or Eco mode is activated, the
temperature will not change until the mode is cancelled.
Cooler Temperature Settings
• Press icon (#9 on control panel diagram), until the 'Fridge temperature setting' is selected (#1).
• Once Fridge temperature setting is selected, the temperature will flash.
• Users can then use the up or down arrow (
Mode).
• If Super Freeze mode or Eco mode is activated, the temperature will not change until the mode is cancelled.
" (#12) for 3 seconds.
(#13) for 5 seconds.
(#13) for 5 seconds.
/
/
EN -10-
icon (#12) and
" (#12) for 3 seconds.
) to
) to set the temperature (8, 6, 5, 4, 2°C and Super Cool
(#9) icons simultaneously