Disposal And Recycling; Troubleshooting - Scheppach TBL400 Original Bedienungsanleitung

12.2 Maintenance
• A worn or damaged steel cable should only be re-
placed by a trained specialist!
• Ensure that all fastening elements (bolts, nuts, etc.)
are always tightened so that it is safe to work with
the drywall lift.
• Store your drywall lift in a dry space.
• All screwed parts as well as the wheels and axles
should be cleaned and then oiled to ensure a long
service life.
• Regular maintenance of the drywall lift will not only
ensure its durability, but will also help to lift your
boards carefully and easily.

14. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your product failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Drywall lift cannot be cranked up.
Drywall lift lowers itself.
Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consuma-
bles.
Wearing parts*: Rollers, steel cable
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.

13. Disposal and recycling

Notes for packaging
Possible cause
Lifting device defective.
Locking brake does not engage
properly.
Locking brake defective.
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
Remedy
Contact your service workshop.
Contact your service workshop.
Contact your service workshop.
GB | 23