Getting Started; Device Selection; Playback Control; Ipod Operation - Dension Audio Systems ice Link Gateway 300 Bedienungsanleitung

GB

Getting started

Is your player up-to-date?
Before you start, please check your player Firmware, and
make sure it is upgraded to the latest version available. For
iPod firmware visit www.apple.com/support/ipod
Dension only guarantees proper functionality with the
latest version of firmware.
We recommend setting up playlists on the player for easier
navigation of music with the car radio or steering wheel
controls.
Study your Radio Manual!
Please study the owner's manual for your radio. This guide
cannot provide detailed and specific support regarding
the various system specific features, like:
• Source selection (CD-changer mode)
• Disc selection
• Fast Forward and Rewind
• Repeat, Random (aka Shuffle or Mix), Scan
• Display and CD-text configuration options,
automatic scroll, etc.

Device selection

Gateway 300/400 automatically detects the iPod and the
USB device when connected to the interface and selects
as a source. When both iPod and USB device are
connected iPod will be selected. To select the USB device,
disconnect iPod. To use the AUX IN disconnect iPod and
USB device (e.g. remove it physically).
Connection or disconnection of iPod or the USB device
will automatically initiate a Magazine Eject/Magazine
Load sequence. If head unit stays in tuner (FM) mode,
select CD Changer manually. This is the normal behavior of
certain head units.
2
Ice>Link Gateway 300/400

Playback control

Select CD Changer as a source on the head unit to start
playback of the selected source device. Playback control
buttons, like FF, RW, RND, REPEAT work as expected,
while PAUSE stops playback and mutes audio.
.
Due to the different charactericteristic of the playback
devices (players), there are slight differences in operation.
See device specific sections for details.

iPod Operation

Connect the iPod to the
docking cable or by inserting it into the active cradle
depending on your choice at purchase.
BMW
Deselecting the CD Changer source or switching off the
radio will pause the iPod, it will then turn off automatically
after few minutes.
The "OK to Disconnect" message indicates that you may
disconnect the iPod at any time.
Note: Track number on the radio is limited to 2 digits; the
iPod track number is always truncated as such.
Gateway 300/400
Turn on the radio, and select CD
GW3AA0.68
Changer as the source. The
iPod will start to play the
previously played song.
To confirm logo and warning just
press Next Track on the radio.
During playback the Track# and
Elapsed Time data is transferred
to the radio display, while the
song information (Album, Artist,
Track Name) and playback
status appears on the iPod
screen.
via the