Parrot ASTEROID Bedienungsanleitung Seite 19

files titles.
Commands
While playing a music track or the radio:
tap the screen to pause / resume playback or
mute the radio ;
slide your finger upwards to increase the
volume ;
slide your finger downwards to decrease the
volume.
While playing a music track (except audio players
connected using a jack / jack cable):
slide your finger to the right to skip to the
next track ;
slide your finger to the left to get back to the
previous track.
Note : If you are using the Parrot ASTEROID Tablet
with an audio player connected via Bluetooth,
these commands are only available if your audio
player supports the AVRCP profile (Audio/Video
Remote Control Profile).
Downloaded from ManualsNet.com
iPod
1. Connect your iPod to the iPod cable.
2. Press the SOURCE button on the remote
control (or tap
select iPod. You can also tap
browse through the content of your iPod.
3. Tap track to start playback.
Note : Tap
repeat, random).
SD card
Note : Make sure your SD card is formatted for
FAT32 to use it with the Parrot ASTEROID Tablet.
You can use the following SD cards (with adapter
if necessary) with the Parrot ASTEROID Tablet :
SD, micro SD , mini SD, SDHC, mini SDHC, micro
SDHC. The SD card capacity must not exceed
32Gb.
Only MP3, AAC or WMA formats are supported.
1. Insert the SD card into the appropriate slot
located on the right of the screen, with the
contact surface facing you (diagram G p.11).
2. Press the SOURCE button on the remote
control (or tap
select SD.
browse through the content of your SD card.
search engine
Music on the screen) and
Browse
to adjust several settings (audio,
Music on the screen) and
You can also tap Browse
3. Tap a track to start playback.
Note: Tap to adjust several settings (audio,
repeat, random).
USB storage device
to
Note : Make sure your storage device is formatted
for FAT32 to use it with the Parrot ASTEROID Tablet.
The Parrot ASTEROID Tablet is compatible with
the majority of USB keys / MP3 audio player /
external hard drive. There is no restriction in
terms of capacity of USB keys.
Only MP3, AAC or WMA formats are supported.
1. Connect your USB device to the USB cable.
2. Press the SOURCE button on the remote
control (or tap Music
select USB. You can also tap
browse through the content of your USB
storage device.
3. Tap track to start playback.
Note : Tap to adjust several settings (audio,
repeat, random).
Audio player connected via Bluetooth
Note: The Parrot ASTEROID Tablet allows you to use
to
the telephone and audio streaming functions from
2 different phones without having to disconnect
on the screen) and
Browse to
English 19 19