Parrot ASTEROID Bedienungsanleitung Seite 13

intended for navigation or driving assistance when
you are driving, an on-screen warning will be
displayed. To watch a video on the Parrot
ASTEROID Tablet's screen, make sure that the
vehicle is stopped in a safe area and that the
parking brake is on.
SD Card
An SD card is included with the Parrot ASTEROID
Tablet. It allows you to play music tracks and is
mandatory in order to use applications.
Downloaded from ManualsNet.com
Installation
Before you begin
Note: We advise our customers to have the Parrot
ASTEROID Tablet fitted by a certified Parrot
installer.
Installing the Parrot ASTEROID Tablet is done by
inserting it between the car stereo and the
speaker system.
Note: If your car stereo is not fitted with ISO
connectors, you need to purchase an ISO adapter
cable to simplify the wiring procedure. Refer to the
Vehicle compatibility section on the Parrot
ASTEROID Tablet support page to check whether an
ISO adapter is necessary on your vehicle.
Start by removing the car stereo from your
vehicle. You may need release keys to do so.
Refer to your car stereo's wiring diagram.
Before you install the individual components,
check that the installation locations have been
selected in such a way that the cable length is
sufficient to connect every element. Once the
installation is complete, make sure that no cables
are pinched or trapped.
The connection number indications in the next
sections
represented on the diagrams p.6 / 7.
search engine
correspond to the connections
Connecting the audio cable
Join the vehicle audio cable to the connector of
the Parrot ASTEROID Tablet (Connections 1A
and 2).
If your vehicle is equipped with an amplifier, refer
to the Installation with external amplifier section
for more information.
Connecting the power cable
1. Always check all connections first with
appropriate test equipment
connecting any cable to the vehicle.
2. Connect the ISO male connectors of the
Parrot ASTEROID Tablet to the car stereo
(Connection 3).
3. Join the vehicle's power supply cable to the
ISO female connector
ASTEROID Tablet (Connection 4).
The red wire of the Parrot ASTEROID Tablet
cable must correspond to the constant +12V
supply, the orange wire to the ignition +12V and
the black wire to ground. Check that the orange
wire is not connected to the constant +12V supply,
as you could run down the vehicle's battery.
Note: In order to check the wiring, connect the
screen before placing it on the dashboard. Refer to
the Checking the wiring section for more
information.
before
of the Parrot
English 13 13