Technical Specifications - cecotec BIGDRY 9000 PROFESSIONAL CONNECTED Bedienungsanleitung

ENGLISH
5. TROUBLESHOOTING
Problem
The unit does not
work
The dehumidifying
function does not
work
No air is discharged
The device
produces strange
noises when
operating

6. TECHNICAL SPECIFICATIONS

Product reference: 05654/05655
Product: BigDry 9000 Expert Connected/BigDry 9000 Expert Black Connected
Power: 320 W
Voltage: 220-240 V 50 Hz
Frequency band: 2.4 GHz
Emission power: 13-14,5-17 dBm
34
BIGDRY 9000 PROFESSIONAL/BLACK CONNECTED
Possible cause
Has the power cord
been disconnected?
Is the tank full indicator
on? (The tank is full or
not installed properly)
Is the temperature of
the room above 35
below 5 ?
Is the filter clogged?
Is the intake duct
or discharge duct
obstructed?
Is the filter clogged?
Is the unit tilted or
unsteady?
Is the filter clogged?
Solution
Plug the power cord into the outlet.
Empty the water in the tank and then
reinstall the tank.
The protection device is activated and
or
the unit cannot operate.
Clean the filter as described in this
manual.
Remove the obstruction from the
discharge duct or intake duct.
Clean the filter as described in this
manual.
Move the unit to a stable, sturdy
location.
Clean the filter as described in this
manual.