Safety Instructions; Technical Data - Hard Head 024515 Bedienungsanleitung

EN

SAFETY INSTRUCTIONS

WARNING!
• Check before installation that no parts
are missing or damaged.
• Make sure that the wall on which the
product is to be mounted is strong
enough to support it. Use the correct
bolts/screws.
• Do not overload.
• Do not stand or climb on the product –
risk of bodily injury.
SYMBOLS
Read the instructions.

TECHNICAL DATA

Max. load
Size, folded away
Size, folded out
Product weight
DESCRIPTION
Wall mounted workbench with folding brackets
that make it ideal for small spaces. The top is
made of MDF and the brackets are made of
powder coated steel.
PARTS
1. MDF board
2. Metal bracket
3. Self-tapping screw M5 x 16
(For mounting the MDF board on the
brackets)
Not included
4. Self-tapping screw M8 x 16
(For mounting the brackets on a wooden
wall or plasterboard wall)
8
150 kg
110 x 60 x 14.5 cm
110 x 60 x 52 cm
14.5 kg
5. Anchor bolt M8 x 60
(For mounting the brackets on a concrete
wall or brick wall)
FIG. 1
INSTALLATION
1. Mark the location of the holes for the
brackets, at a distance of 600 mm
between the centre points.
2. Drill holes in the wall at the marked
locations. The centre-to-centre distance
between the holes is 600 mm.
FIG. 2
3. Secure the brackets to the wall. Use
the correct type of anchor for the wall
material.
FIG. 3
4. Install the MDF board the right way, i.e.
the side with the rulers faces down.
FIG. 4
5. Secure the MDF board to both the
brackets.
FIG. 5