Safety Instructions; Technical Data - Hard Head 024777 Bedienungsanleitung

SAFETY INSTRUCTIONS

Read these instructions carefully before
assembly and use. Save the instructions for
future reference.
• Keep small parts out of the reach of
children – risk of suffocation.
• Keep children away from the product.
• Do not climb or stand on the top.
• Do not overload the product.
• Watch out for naked flames and other
sources of heat.
• Handle the frame and other parts with
care.
SYMBOLS
Read the instructions.

TECHNICAL DATA

Max load
Size
Weight
DESCRIPTION
Heavy-duty workspace with laminated
chipboard worktop. The steel frame has four
adjustable feet and storage space under the
bench.
Parts
FIG. 1
ASSEMBLY
PREPARATIONS FOR ASSEMBLY
1. At least two persons are needed to move
and assemble the product.
2. Place all the parts on a mat or the
equivalent, to protect the surface.
350 kg
120 x 50 x 90 cm
18 kg
3. Parts of the product have sharp edges –
wear safety gloves.
4. Open all the drawers and check that all
the parts on the list are included and
undamaged.
5. Keep small parts out of the reach of
children – risk of suffocation.
6. If power tools are used for installation, set
low speed before use.
7. Align the holes to each other. Do not fully
tighten the screw unions at first, this will
make it difficult to complete the assembly.
ASSEMBLY
1. Open all the drawers and check that all
the parts on the list are included and
undamaged.
2. Align the holes to each other. Do not fully
tighten the screw unions at first, this will
make it difficult to align the holes to each
other.
FIG. 2-5
EN
9