Care & Maintenance - NRS Healthcare SEAHORSE PLUS N72012 Benutzeranleitung

6.2 Fitting and Using the Anterior Supports
Note: Each anterior support is specific to the left /
right hand side of the chair.
WARNING: The chair is designed to be used with
either the armrests or anterior supports in place.
The anterior supports can be removed if they
get in the way of entry / exit of the chair (such
as hoisting a user or during side transfers).
However, the anterior supports should always be
fitted when operating the Tilt-in-Space function
of the chair.
The anterior supports are not designed to support
the user's full body weight. If sat on, they could be
damaged.
Make sure you have the correct size for the chair:
Anterior Support
N72127: Small
N72188: Medium / Large
Y
1. Turn the adjustment knob (Y) counter-clockwise
and slide the armrests off the mounting plates.
Z
Y
1. Turn the adjustment knob (Y) counter-clockwise
to loosen.
2. Slot the anterior supports onto the mounting
plates (Z) either side of the chair.
3. Tighten the adjustment knob (Y) clockwise to
secure the supports.
4. The anterior supports are removed using the
same method as the armrests.
7. CARE & MAINTENANCE
We strongly recommend you check the product at
regular intervals for damage and correct operation.
7.1 Weekly Checks
Check the gas-strut is clean and free from damage
(refer to Section 7.6 for cleaning details)
7.2 Monthly Checks
Check for any loose or visually damaged parts, loose
or missing screws.
Check that the seat is secure and not showing any
free-play.
WARNING: If any faults or damage is identified,
STOP using the chair immediately.
7
6
5
1
2
1. Check all height adjustment clips are securely in
place (see section 5.2, 5.3).
9
4
4
1
2
4
4
3 & 4