Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
When the desired angle is reached, release the
two red buttons and the chair angle will lock.
3.
To return the chair to upright, press down on
the push handles to support the weight of the
occupant, then press the red buttons (J) to
release the lock.
4.
Raise the chair to the upright position by gently
pulling up on the two push handles. When the
chair is at the required position, release the two
red buttons.
5.6 Using and Adjusting the Lap-Strap
WARNING: Make sure the lap-strap is correctly
adjusted for the user every time the user is
seated. Incorrectly adjusted lap-straps can result
in the user sliding forwards in the chair.
K
L
K
L
1.
Loosen the lap-strap on each side by feeding the
K
L
loose end of the webbing (K) through the slider
(L) until the lap-strap is at its longest setting.
K
L
K
L
2.
Position the user in the chair, then fasten the lap
strap, using the buckle (M), loosely around the
K
L
users waist.
K
L
N
N
K
L
3.
Adjust the fit of the lap-strap by feeding the
excess webbing (K) through the sliders (L) on
each side until the lap-strap is a loose fit. Make
N
sure there is a gap of approx 50mm (2") between
the padded sections.
N
L
L
L
M
L
M
50mm
L
50mm
M
L
50mm
L
M
N
50mm
N
L
N
N
4.
For final adjustment to ensure a tight fit, pull
on the two D-shaped toggles at the front (N) to
close the gap between the padded sections.
5.7 Removing the Pommel
K
K
Lift the pommel clip (P) to release the pommel, then
slide the pommel out.
K
5.8 Using the Commode Pan
WARNING: We
removing the commode pan with a user in the
chair, to minimise the risk of entrapment.
K
WARNING: The commode pan can be heavy
when full.
K
K
K
K
1.
To insert the commode pan, raise the commode
pan latch (R) and align the commode pan with
the two grooves under the seat, and slide into
position. The latch (R) should then be released
and should click into place in the slot in the
commode pan.
7
P
recommend
not
R
P
inserting
/
Werbung
Inhaltsverzeichnis
