Herunterladen Diese Seite drucken

Technical Specifications - xjump XJ 100 Bedienungsanleitung

Verstärkter bluetooth-lautsprecher

Inhaltsverzeichnis

Verfügbare Sprachen

TECHNICAL SPECIFICATIONS

Rechargeable Battery:

Power supply:

Power audio:

Frequency response:

S/N ratio:

Distortion factor:

Impedance:

Max Bluetooth power transmission: .........................

Bluetooth transmission frequency: ...........................

Index protection:

Dimensions:

Weight:

INFORMATION ON THE REMOVAL AND DISPOSAL OF BATTERIES

Warning: the operation of removal and disposal is reserved to technical personnel!

Whatever type of battery used up, it should never be placed in household waste, fire or water. Each

type of used battery must be recycled or disposed of at an appropriate dedicated collection points.

To remove the battery:

1. Remove the cover grille above the speakers by levering the part near the keyboard;

2. Remove the side membranes;

3. Unscrew all the screws and separate the front part of the cabinet from the rear one;

4. Locate the battery, remove it and replace it with one of the same characteristics and capacity.

.............................................

Internal Li-ion 7.4V, 2500mAh

40W

80Hz - 20KHz

>75 db

<1%

4Ω

0,8mW

2,4GHz

IP67

220 x 88 x 88mm

680gr

English

Inhaltsverzeichnis