Power On/Off; Volume Adjustment - xjump XJ 100 Bedienungsanleitung

English
CHARGING
The speaker must be recharged when switched Off.
1. Insert one end of the power cord into the Type-C (9) port of the device and the other end USB
into the standard 5V
2. The LED indicators (2) will blinking, indicating the charging status; 4 orange lights will be lit
when your unit is fully charged.
This device is inbuilt with charge protection circuit, which can be connected to changer for long
time; it will take about 3-4h to charge the battery fully; the endurance of the battery depends on
low or high volume.
Note: When the battery is low, the device will emit a warning sound for a few times before
automatically turning off.
POWER ON/ OFF
Press and hold the button
will flash.
Press and hold the button
will turn off.

VOLUME ADJUSTMENT

Press the key (4) several times to decrease the volume, or the key
14
2A external DC adaptor (not included);
(1) for 2 seconds to power On the speaker. The working state Led (6)
(1) for 2 seconds to power Off the speaker. The working state Led (6)
(3) to increase the volume.