MALTEC DH-12200 Bedienungsanleitung Seite 30

● Sleeping mode: Touch the sleep button, the button lights up and start the sleep
function. After no operation in 10 seconds, all indicators turns dark gradually and the wind
speed is automatically switched from high to low. Touch any button to wake up the
indicator. Touch sleep button again to exit the sleep mode.
In sleep mode, the fault code is not displayed, the wind speed is not adjustable, and the
humidity is adjustable.
In automatic mode or sleep mode, you can operate this key to adjust the set humidity:
every time you press the set humidity increase by 5%, according to the cycle of 30%-80%.
Long press this key to query the current room temperature, double eight lights display the
current room temperature 5 seconds after the automatic return to display the current
humidity. If this key is pressed for a long time, it will be display the ambient temperature.
Press this key to set the timer function of 0-24 hours. The interval is 1 hour. Each time you
press this button, the value increased 1 hours and then the corresponding timing value is
displayed on the screen. The setting value is "00" to cancel the timer function. The
indicator turns out.
After the timer is set and completed, the timer LED is on during the timing period. After the
timing is over, the timer LED turns off automatically.
In the running state, set the time to turn off the machine;
in the standby state, set the time to turn on the machine.
The wind speed can only be adjusted in the automatic mode. Press this key to switch the
high and low wind speed. The corresponding wind speed indicator lights up.
30/ 56