Switching The Product On/Off; Charging The Product - nedis SPBT2006BK Kurzanleitung

Switching the product on/off

1. Press and hold the power button A
the product.
The product automatically enters Bluetooth® pairing
mode.
2. Press and hold the power button A
the product.
The product automatically switches off after 10
4
minutes of inactivity.

Charging the product

The product is delivered with a partially charged
4
battery. For optimal battery life, fully charge the
battery before first use.
You can charge the product in two ways.
1. Plug the USB-C connector of the USB - USB-C
charging cable A
A
.
8
2. Plug the other end of the USB – USB-C charging
cable A
5
provided).
3. Plug the USB adapter into a power outlet.
For charging via the USB charging cable:
1. Plug the USB-C connector of the USB - USB-C
charging cable A
A
.
8
2. Plug the other end of the USB – USB-C charging
cable A
5
A PC is a usable power source for example.
4
When the battery is low the speaker emits the
4
voice alert "Please charge".
into the USB-C charging port
5
into a 5V/1A USB adapter (not
into the USB-C charging port
5
into a 5V/1A power source.
5
2 to switch on
2 to switch off