Charging The Product; Switching On The Product - nedis SPBT5010BK Kurzanleitung

•
This product is equipped with a non-removable internal battery. Do not
attempt to replace the battery yourself.
•
Disconnect the product from the power source and other equipment if
problems occur.
• Do not leave the battery on prolonged charge when not in use.
• After extended periods of storage, it may be necessary to charge and
discharged the cells or batteries several times to obtain maximum
performance.
•
During charging the product must be placed in a well-ventilated area.
•
Some wireless products may interfere with implantable medical devices and
other medical equipment, such as pacemakers, cochlear implants and
hearing aids. Consult the manufacturer of your medical equipment for more
information.
•
Do not use the product at locations where the use of wireless devices is
prohibited due to potential interference with other electronic devices, which
may cause safety hazards.
Pairing the product to Bluetooth audio source
1. Press and hold the power button A
The status indicator LED A
active.
2. Enable Bluetooth on the device you want to pair the neck speaker with.
3. Select "SPBT5010BK" from the list of available Bluetooth devices on your
device.
3
A
4
Hold the product within 1 meter from the Bluetooth source while pairing.

Charging the product

1. Plug the micro USB cable A
2. Plug the other end of A
3. Plug the power adapter into a power outlet.
The charging indicator LED A
4 A

Switching on the product

• Press and hold A
BT5010BK_MAN_COMP_0520_print_(20266 1422)_v01.indd 6
3
turns blue to indicate pairing is successful.
3
switches off when the battery is fully charged.
6
to switch the product on or off.
6
to switch on the product.
blinks red and blue to indicate pairing mode is
8
into the micro USB port A
8
into a computer or power adapter.
3
burns red to indicate the product is charging.
6
4
.
15-5-2020 09:20:40