Salente AirFit Bedienungsanleitung Seite 41

4. You can then start cooking by touching the main switch indicator D19.
5. You can change before and during cooking:
 temperature from 180 °C to a value in the range 80-200 °C and in steps of 5
°C by touching the temperature change indicators minus (D17) or plus
(D18). The only exceptions are the programmes for preparing dried meat
and drying mushrooms and vegetables, where the temperature range is
limited to 30-80 °C, and the programmes for preparing yoghurt and
defrosting, where the temperatures are fixed at the factory and cannot be
changed (see table below). To scroll through the values faster, you need to
hold your finger on the symbol.
 time from 15 minutes to a value in the range 1-60 minutes and in 1 minute
increments by touching the time change minus (D20) or plus (D21)
indicators. The only exceptions are the programmes for yoghurt, dried meat
and drying mushrooms and vegetables, where the range is limited to 2-24
hours in 30-minute increments. To scroll through the values faster, you
need to hold your finger on the symbol.
6. You can then start cooking by touching the main switch indicator D19.
7. The cooking progress is indicated on the display by the ongoing symbols D4,
the flashing symbol of the selected program (one of the symbols D5-D16) and
the simultaneous alternating display of the set temperature and the elapsed
time.
8. Even during cooking, the set temperature or remaining time can be changed by
touching the temperature change minus(D17) or plus(D18) or time change
minus(D20) or plus(D21) indicators. To scroll through the values faster, you
need to hold your finger on the symbol.
9. During cooking, you can check the doneness of the food by pulling out the
frying basket. The cooking time countdown will stop automatically and the
entire display will go out. Cooking then resumes and the display lights up when
the frying basket is put back into the fryer. The maximum time to continue
cooking after removing the frying basket while the programme is running is 60
minutes.
10. Cooking can be prematurely stopped by touching the D19 main switch
indicator, or automatically stopped after the set time has elapsed.
11. The end of cooking is signalled by displaying the "OFF" symbol and the ongoing
C4 symbols on the display for approx. 20 seconds, followed by an acoustic
signal (5 long beeps).
41