Routine Maintenance - Tecfrigo SAMBA Zusammenbau Und Betrieb

6. OPERATIONS AND ADJUSTMENT
The equipment controls are located in the control panel:
(1) Electronic control panel: Gives tank temperature
I
(2) Refrigeration switch: Use to connect the cooling system
(3) Light switch: Use to switch on the light
UK
The temperature of the equipment can be adjusted by pressing the
set cell temperature (on the screen). Press the
D
"DOWN" Key (8)
press the
E
!
CAUTION: Before placing goods ensure that:
F 1. the plug is connected;
desired temperature for the goods to be stored; . appliance is not exposed to direct sunlight or to
powerful lamps;
NL
7.

ROUTINE MAINTENANCE

P
Once a week: for equipment in continuos operation
Every evening: for intermittent daily use
S
1 . Disconnect power. . Remove goods and place them in a suitably refrigerated place. . Defrost the
evaporator by suspending operations for approximately one hour. . Clean the walls and accessories with
DK
a sponge dampened with water and sodium bicarbonate and dry carefully.
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
Operator's guide
to decrease the temperature
2. the refrigeration unit switch is on (green light lit up); . thermometer shows the
5. ambient temperature does not exceed +30°C with 55% R.H. (climatic class 4);
2
"SET" key (6)
"UP" Key (7) several times to increase the temperature, or
(see picture 2)
4
4
7
(just once): to display the
3
3