Mobilex 272010 Gebrauchsanleitung Seite 10

Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Preliminary check
Check the contents of the box with the list above. If at this stage you discover that a part is missing or damaged,
contact your supplier immediately.
3. Description
Product description
Overbed table with height and tilt adjustable wooden chipboard tray and a metal frame. It comes with 2 lockable
wheels.
The table consists of following elements:
1. Chipboard tray – Standard table tray.
2. Height adjustment knobs – They enable adjusting the height and
angle of the tray.
3. Wheel locks – They prevent movement of the table.
4. Four turning wheels – Thanks to these wheels the table can be
easily re-positioned.
Function description
Height and tilt adjustment
To adjust the height of the tray, loosen the two knobs (2), slide the tubes
to the desired position, and re-tighten the knobs.
To change the angle of the tray, simply slide one of the tubes higher or
lower than the other while adjusting it.
Lockable turning wheels
The two wheels (3) can be locked in place by pushing down the plastic
pedal.
WARNING! The wheels must be fully locked and the table secured in
place before usage.
Assembly
The assembly instructions are on the last page of this manual.
Accessories
There are no accessories provided for this device
4. Technical data
Overbed Table
Size of the tray (width x length)
Height (adjustable)
Weight
Carrying capacity
Product label
A product label is placed on the front of the frame.
Example of product label
Rev. 06-22
Item no. 272010
41 x 55 cm
61 - 87 cm
7,5 kg
10/24
1
2
3
4
15 kg
Meaning of the icons
UM-272010-MULTI-14062022