2GO Active BT1 Bedienungsanleitung Seite 6

EN User Manual Bluetooth Headset Active BT1
Bluetooth headset should be used with the compatible devices which support Blue-
tooth wireless technology.This allows you to make calls and enjoy the music streaming
at any time freely.
Please read this user manual carefully before using the headset, and also read your devi-
ce's user manual regarding the Bluetooth function, and pay attention to those important
safety and maintenance information. Please keep the headset away from children.
Device view
1 Speaker
2 MFB-Button (Multifunction)
3 Volume up (+) / next song
4 Volume down (-) / prevou song
5 Microphon
6 Status LED
Status des Headsets
1 Pairing Mode
The headset can be searched, the indicator light flashes red and blue alternately.
2 Not Connected
The headset is not connected with the device, blue light will flash twice each 8 seconds.
3 Standby Mode
The headset is connected with the device, and no any other operations, blue light will
flash once each 6 seconds.
4 Call State
In a call state, the indicator light flashes blue once each 6 seconds.
5 Charging State
The indicator light turns red while being charged, and will turn off automatically after
being fully charged with blue light for 5 minutes.
Charging Your
• Prior to using the headset for the first time, please fully charge the battery.
• Approximately 2 hours are required to fully charge the headset.
• The indicator light turns red while being charged, and will turn off automatically after
being fully charged with blue light for 5 minutes.
• When the battery's voltage below 3.3V, the speaker will prompt "Please Charge" once
each 30 seconds(the headset will switch off automatically when the battery's voltage
is less than 3.0V. You can hear "Power off"). Please charge the headset as above steps
in time to prolong the battery's useful life (Charging indication will be delayed for a
few minutes if the headset has not been used for a long time or the battery is
Specifications
• Check the charging device is suit to the headset.
• Use only the supplied charger to charge the headset, or
• Do not attempt to force open the built-in battery as this could damage the headset.
• If left unused, a fully charged headset will lose its power automatically. It is recom-
mended to charge the headset each three months.
• Do not leave the headset in a too hot or too cold obey the validation for this product
or the maintenance condition (best between -20°C and 60°C) which may affect the
headset's operations although it is fully charged.
• Do not dispose of the headset into a fire or water article and could be dangerous.