Weak Battery; Recharge Battery - INNOCIGS EVIC PRIMO MINI MOD Bedienungsanleitung

INNOCIGS EVIC PRIMO MINI – ERROR MESSAGES & PROTECTIONS
New Head
If a head with a larger resistance than the previous one is used, the resistance of the head must be reset.
When the head is removed, press the fire button for a few seconds to start the reset. After
installing a new coil, it is automatically recognized and the message „New Coil Up" appears.
Press the „Up" button to confirm a new reel.
If the message appears to be inadvertent (eg when re-using the same coil that is still warm),
press the „Down" button to establish the „basic resistance".

Weak Battery

When the power output of the batteries drops below 2.9 V, the display will read "WEAK BATTERY". The output
power will be reduced to match the voltage output of the batteries.

Recharge battery

If the voltage falls below 3.3 V, „BATTERY LOW" appears on the display. When the fire button is pressed again,
„BATTERY LOW LOCK" appears and the unit switches off. Please recharge the device.
68