•
Settings
Scan settings
Choose FM at first, it will go to a specific station playing. Then press "MENU" on the radio to
get above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise
ratio (hiss) from weak stations. To change the scan settings to stop only at stations with
good signal strength choose "Strong" but you also can choose "Normal" and "Weak".
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen
in mono only.
This unit only contains a Bluetooth receiver! You cannot connect a
Bluetooth Headset or similar.
When you select the Bluetooth mode, the device is entering to
pairing and the BT icon at the bottom of the screen will flash.
Turn on your smartphone, tablet or other Bluetooth devices to search
for the device.
The Bluetooth pairing name is "ICD5000".
When pairing is successful, the Bluetooth indicator will light up and
stop flashing.
To release BT pairing, turn off or unpair your smartphone, table or
other Bluetooth devices.
Press "
" on the radio or Remote Control to start or pause the playback. You can press "
or "
" on the radio or Remote Control to play the previous or next track.
Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.
Use a RCA audio cable or optical cable or coaxial cable to connect the DVD player / TV outputs
with the AUX / OPTICAL / COAXIAL input socket from the sound board.
To set the sleep timer, press "SLEEP" on the unit or Remote Control. Choose from Sleep OFF,
15mins, 30mins, 45mins or 60mins.
Once you select a sleep period, the system returns to the "Now playing" screen.
If you go under Main Menu to Sleep press "MENU" on the unit or Remote Control to return to
the "Now playing" screen.
BLUETOOTH
AUX IN/OPTICAL/COAXIAL
SLEEP
14
ICD5000 / English Instruction Manual
®
"