6. Time zone/daylight
Set your time zone. If your country uses daylight saving and it is in effect, turn on the
Daylight saving option. (only available when Auto update from Internet is selected)
Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date
and time are displayed as dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the front knob. Once the value
is set, press the knob to continue setting with next value.
7. Network
Keep Network connected
Select this option when the unit should the network connection in standby keep, when the
function is confirmed, the unit wills faster connecting the internet and it is possible to switch
on the unit with the "UNDOK" app. The standby power consumption is slightly increased
with this function.
Scanning for the network
ICD5000 is compatible with all common network protocols and
encryption methods. It searches for the available networks and list
them out for you.
There will be hints for the type of network – if your network devices
support WPS function, it will be [WPS] before the SSID (the name
of the network device). Select the one you want to connect. For the
wireless connection, you will be asked for input the encryption in
the next step. To enter the network's key, use the front knob to
move the cursor through the characters and press "OK" to confirm.
As each character is selected, the key is built up near the top of the
display.
There are three options accessible by tuning the navigate reel back
before the first characters – Backspace, OK and Cancel.
WPS encrypted network
WPS encrypted networks are identified by WPS at the start of the network name when the
ICD5000 searches the available AP. Use one of the following methods of connection: There
is the shortcut WPS key on the unit.
Push button
ICD5000 prompts you to press the connect button on the router. It
then scans for a ready Push Button Connect network and connects.
ICD5000 / English Instruction Manual
7