Hush Remote - Yellowtec Hush Bedienungsanleitung

hush Remote

Select the mode "REMOTE" to manage your OnAir signaling at the push of a button
via hush Remote. Therefore, connect the remote to the slot on your hush's rear
panel which is marked with "REMOTE ONLY".
OnAir Button
Press the OnAir button on your hush
Remote to indicate on your m!ka Mic
Arm that you are OnAir.
As soon as you do so, the LED signal
of your m!ka Mic Arm will light up red
without any delay. If you are using the
hush + version, this step will also
activate your microphone signal.
Press the OnAir button again while the
LED signal of your m!ka Mic Arm is red,
to turn off the red shining OnAir indica-
tor. Using hush + , this also deactivates
your mic signal.
hush Remote
Mute Button
The mute button of the hush Remote
is designed as a cough button. Since
only the hush + model with its preamp
processes your audio signal, the mute
function is only available with hush
Press and hold the mute button to
mute your microphone signal. A white
shining OnAir indicator on your m!ka
Mic Arm as well as a yellow Mute but-
ton and a red flashing OnAir button
on the hush Remote unmistakably
indicate muting.
Release the mute button to reactivate
your microphone signal. Doing so, the
OnAir LED will light up red again and
you are back on air.
hush + + .
29