Intended Use; Technical Parameters - Strend Pro SDDR-140 Gebrauchsanweisung

ENGLISH
EN
ELECTRIC POLYSTYRENE CUTTER
The cutter is meant for cutting various types of insulating materials (e.g. polystyrene (EPS), extruded
polystyrene (XPS), foamed polyethylene (EPE), etc.) using a cutting wire.
Use the device only for the prescribed purposes. Any other use is considered a case of misuse. The
user/operator and not the manufacturer will be responsible for any damage or injury caused by this misuse.
VOLTAGE/FREQUENCY
MAX. CUT LENGTH
MAX. CUT THICKNESS
ADJUSTABLE ANGLE OF VERTICAL CUT
ADJUSTABLE ANGLE OF DIAGONAL CUT
CUTTING WIRE TEMPERATURE
OPERATION
CABLE LENGTH
PROTECTION CLASS
BASE DIMENSION

TECHNICAL PARAMETERS

INPUT
WEIGHT

INTENDED USE

From the transformer to
the power supply
From the transformer to
the frame socket
230 V / 50 Hz
200 W
140 cm
30 cm
0 - 90°
0 - 75°
550 °C
Max switch-on time 15 s
Switch-off time 45 s
IPXO
35 x 170 cm
16 kg
3 m
1 m