Cleaning And Maintenance - Inventum KV1880B Benutzerhandbuch

6

Cleaning and maintenance

Before cleaning the appliance, switch it off by removing the plug from the wall socket.
Remove the food from the refrigerator. Clean the inside of the refrigerator. Use warm soapy water with a neutral cleaning
agent to prevent nasty smells. Wipe the inside of the refrigerator after cleaning with clean water and properly wipe
everything dry. Leave the appliance to dry for 1 to 2 hours. The shelves and drawers can be removed from the refrigerator
easily and washed by hand. These components may never be cleaned in the dishwasher.
For areas in the refrigerator that are difficult to clean, such as small openings or corners, it is recommended wiping them
clean regularly with a soft cloth or brush. If necessary, a tool can be used, such as thin sticks (cocktail sticks, for example),
to make sure no dirt can accumulate in these areas.
Clean the outside of the refrigerator and the door rubbers with a soft damp cloth.
Clean the back of the refrigerator and the surface on which the refrigerator stands at least once a year with a vacuum
cleaner, so that the ventilation holes remain clean and the refrigerator is able to function as optimal and as energy-efficient
as possible.
Do not use hard brushes, steel wool, abrasives (such as toothpaste), organic solvents (such as alcohol, acetone, oil, etc.),
boiling water, acid or alkaline products to clean the refrigerator. This could damage the exterior or interior of the appliance.
Boiling water and benzene could deform or damage plastic components.
Defrosting
The freezer section of this appliance is free from frost - no-frost. If used correctly, no ice will be formed.
If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm. Remove
all products from the freezer section. Store the frozen products on a cool location, packaged in newspapers and blankets.
Remove the plug from the socket and keep the door of the cooler section closed while defrosting the freezer section.
Defrost the freezer section Defrosting can be accelerated by placing a tray with hot water in the freezer section. Do not use
sharp metal objects to scrape the freezer section clean, use a plastic ice scraper.
Clean and dry the freezer section. Insert the plug in the socket and set the thermostat to the required setting. Place the
frozen products back in the freezer section once it has reached the required temperature.
Warning: Never remove ice with sharp objects, defrosting sprays, a hair dryer, a heater or something similar.
This could lead to unsafe situations and cause irreparable damage to the appliance.
Replacing the LED lamp
This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the LED lamp in the
appliance is broken, you are not able to replace it yourself. Contact the Inventum service department.
25
English •