Technical Data; Noise/Vibration Information - Bosch GWS 180-LI Professional Originalbetriebsanleitung

20 | English
(11) Clamping nut
(12) Protective guard for cutting
a)
(13) Cutting disc
(14) Handle (insulated gripping surface)
(15) Grinding spindle
a)
(16) Hand guard
a)
(17) Rubber sanding pad
a)
(18) Abrasive disc

Technical Data

Angle grinder
Article number
Rated voltage
A)
Rated speed
No-load speed
Max. grinding disc diameter
Grinding spindle thread
Max. thread length of grinding
spindle
Restart protection
Run-out brake
Soft start
Weight according to EPTA-Procedure 01:2014
– with low-vibration auxiliary
handle
– with standard auxiliary handle
Recommended ambient temperat-
ure during charging
Permitted ambient temperature dur-
C)
ing operation and during storage
Compatible rechargeable batteries
Recommended rechargeable batter-
ies
Recommended chargers
A) Rated speed in accordance with EN 60745-2-3
B) Depends on battery in use
C) Limited performance at temperatures <0 °C

Noise/Vibration Information

Noise emission values determined according to
EN 60745-2-3.
Typically, the A-weighted sound pressure level of the power
tool is 80 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-3:
1 609 92A 5GT | (14.06.2021)
(19) Round nut
a)
(20) Cup brush
(21) Diamond core bit
(22) Extraction guard for cutting with cutting guides
(23) Diamond cutting disc
a) Accessories shown or described are not included with the
GWS 180-LI
3 601 JH9 0..
V=
-1
min 11.000
-1
min
mm
mm
B)
kg 2.2–2.9
kg 2.0–2.8
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GBA 18V... ≥ 4.0 Ah
ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
Surface grinding (roughing):
a
h
Disc sanding:
a
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
a)
a)
a)
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
GWS 180-LI
3 601 JH9 0..
18 18
11.000
– –
100 115
M 10 M 14
22 22
● ●
– –
● ●
2.3–3.1
2.2–2.9
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GBA 18V... ≥ 4.0 Ah
ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
2 2
= 7.0 m/s , K = 1.5 m/s ,
2 2
= 3.5 m/s , K = 1.5 m/s .
a)
GWS 180-LI
3 601 JH9 0..
18
11.000
–
125
M 14
22
●
–
●
2.3–3.1
2.2–2.9
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GBA 18V... ≥ 4.0 Ah
ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools