Inventum SKV4178B Benutzerhandbuch Seite 21

4
use
The control unit of the appliance is located on the outside. Check that the voltage corresponds with what is stated
on the information plate and insert the plug in the socket.
Important: the operating panel will only light up when a key is pressed or one of the doors is opened. The rest of the time
the operating panel will be standby and not light up.
Important: the operating panel locks automatically. In order to change the temperature or a function, press the key lock for
3 seconds until the lock disappears from the operating panel.
Instruction: the recommended temperature setting lies between 0°C and 4°C for the cooler section, and between -18°C
and -24°C for the freezer section.
Instruction: The ambient temperature, the frequency of opening the door and the position of the appliance have an effect
on the temperature in the appliance.
Take this into account when setting the thermostat.
Operating panel
1. Cooler section symbol
2. Freezer section symbol
3. Temperature indicator
4. Super cooling/freezing symbol
5. Fruit/vegetable symbol
6. Beverages symbol
7. Meat symbol
8. Key lock symbol
Display
A. Temperature up key
B. Temperature zone selection key
C. Temperature down key
D. Variable fresh food drawer temperature
E. Key for key lock
Setting the temperature of the freezer section
On the operating panel, press the temperature zone selection key until the freezer
section symbol lights up. Then press the temperature up or down key once or several
times until the required temperature is shown on the display. The temperature of the
freezer section can be set between -16°C and -24°C.
Setting the temperature of the cooler section
On the operating panel, press the temperature zone selection key until the cooler section symbol lights up. Then press the
temperature up or down key once or several times until the required temperature is shown on the display. The temperature
of the cooler section can be set between 2°C and 8°C.
Setting the temperature of the variable fresh food drawer
On the operating panel, press the VARIO TEMP. key once or several times until the symbol of the required cooling setting
lights up. The temperature of the variable fresh food drawer can be set to the positions of fruit/vegetables, beverages
and meat. The accompanying symbol lights up. The fruit/vegetables setting is ideal for storing fruit and vegetables. The
beverages setting is suitable for dry foodstuffs and beverages. The meat setting allows you to store packaged meat for 1 to
2 days.
Attention:
• While setting the temperature, the temperature indication flashes on the display. After setting the temperature, the
operating panel is locked automatically and after approximately 30 seconds the display switches off. The temperature of
the freezer section is shown on the display when one of the doors is opened or a key is pressed.
• After setting the temperatures, the appliance starts to cool continuously until the set temperatures have been reached.
Allow the appliance to reach the required temperature with no food. Usually this will take 2 to 3 hours. After this, you are
able to fill the appliance with food.
1
3
4
5
A
B
C
English
2
8
7
6
D
E
21
•