Warranty; General And Safety Standards - Fm Rx Serie Bedienungsanleitung

2. WARRANTY

The warranty period is 12 months from the date of purchase of the unit.
The warranty does not cover damages to the glass, lamps, door seals, insulating material or damages
caused by improper installation, maintenance, or lack of maintenance, repair and misuse.
To process the repair of a unit under warranty or for any other query, please contact your distri-
butor and reference to the following description table:
Distribuitor:
Unit model:
Name:
Fault description:
Address:
Contact telephone number:
Warning: improper adjustment, installation, service or maintenance of the unit may lead to
damages to the goods or persons. For this reason, read this manual thoroughly before starting the unit.

3. GENERAL AND SAFETY STANDARDS

Safety standards and responsibility for installing and maintaining
• Read this manual thoroughly before starting the unit and keep it for further consultation. If you need
technical support, contact an authorised technical service.
• Installation, starting and maintenance of the oven shall be carried out by qualified technicians in ac-
cordance with the scale and technical characteristics specified by the manufacturer. Likewise, observe
the current legislation on safety and with regard to installations and occupational safety in force in the
country of use.
• Check that the unit is unplugged from the power supply before installing or maintaining.
• Before installing the unit, check that installations are in accordance with the current legislation in the
country of use and refer to the indications on the data plate.
• Do not manipulate or disconnect the unit safety devices. This will invalidate the warranty.
• Damages, injuries or fatal accidents could be produced due to the non-observance of the manufactu-
rer's indications.
• If the oven is installed on supports or overlaying parts, use the ones supplied by FM only and follow the
assembly instructions inside the packaging.
• Non-original spare parts do not ensure the correct operation of the unit and will imply the loss of the
warranty.
• The over must be only used by duly-trained technicians.
• The oven data plate provides necessary technical information for repair or maintenance. Therefore, avo-
id removing, damaging or modifying it.
• Failure to comply with these safety standards will release FM from any responsibility and the warran-
ty will become null and void.
Safety standards for use
• Read this manual carefully before starting to work with the unit and keep it for future reference. If tech-
nical assistance is required, please contact an authorized service center.
• If the unit is not used for a long period of time, all connections (power and water supply) must be discon-
nected.
• The internal and external surfaces of the appliance must be cleaned frequently to ensure hygiene and
proper functioning of the appliance. These surfaces must not be cleaned with abrasive or flammable
products that could damage the unit.
• Use and cleaning other than those recommended by the manufacturer and with unauthorized products
may cause damage to both the equipment and the user.
Country of destination:ES
Serial number:
Date of the request:
Time frame:
- 11 -