Coffee Queen QUEEN PEARL Bedienungsanleitung Seite 19

4. Installation
Installation must be carried out by a qualified fitter.
E
C
Water
IN
D
Queen Pearl with base cabinet
A
B
Figure
1.
Installation of Queen Pearl with base cabinet.
Install the machine using the supplied
water hoses and gas dome.
4. Undo the rear section of the machine.
5. Mount the gas dome (A) on the carbon dioxide
cylinder (B) and then fit the supplied nipple on
the gas dome. Connect the carbon dioxide
cylinder to the cooling unit using the
water hose (C).
6. Connect the supplied 1/2" hose to
the machine (D) and then to the water main.
It is recommended that you connect the hose to
a shut-off tap.
Check that no kinks or sharp bends have formed
on the hoses during connection.
7. Fit the tap bosses, see Figure 1.
8. Fit the drip tray (E).
9. Connect the plug to an
earthed 230V 10A wall socket.
10. Flush out approx. 2.5 litres of chilled still water
and then approx. 2.5 litres of carbonated water
before putting the machine into use.
6.
WATER LINE