Battery Warning; Charging Your Scooter; Inspection, Maintenance, And Storage - IconBiT TRIDENT GT PRO Bedienungsanleitung

7. Battery Information and Speci cations
This section is intended to provide you basic information about your battery and charger. Please read this section carefully to ensure you. For user safety and to
prolong the life of your battery, as well as improve battery performance, please follow these instructions.
Battery Power
When the Battery Indicator shows low battery capacity, please charge your battery 5-6 hours utilizing the charger that you
received in your TRIDENT GT PRO package. To fully recharge your battery please follow the instructions under Charging
your TRIDENT GT PRO.

BATTERY WARNING

Failure to follow the Safety Precautions listed in the Battery Warning could lead to serious bodily injury and death.
Seek immediate medical attention if you are exposed to any substance that is emitted from the battery.
• Do not attempt to modify, change, or replace your battery.
• Do not use your TRIDENT GT PRO if the battery begins to emit odor, overheats, or begins to leak.
• Do not touch any leaking materials, or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
• Please only use the charger provided by TRIDENT GT PRO.
• Do not attempt to charge the TRIDENT GT PRO if the battery has discharged or emitted any substances. In that case, the battery should be abandoned for safety.
• Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium Ion batteries.
• The scooter should only be shipped in its original packaging.
• Do not throw away your box as you need youк scooter packaging for future use.

8. Charging your scooter

Step 1: Ensure that the charging port is clean and dry.
Step 2: Plug the charger into the wall, then connect the cable with the power supply
(AC 100 - 240V 50/60 Hz), make sure the light on the charger is lit GREEN.
Step 3: Connect the charging cable into the charging port of the TRIDENT GT PRO.
The indicator light on the charger should change to RED, indicating that your
TRIDENT GT PRO is now being charged. When the RED indicator light on your
charger turns to GREEN, then your TRIDENT GT PRO is fully charged.
Step 4: Please unplug the charger from your TRIDENT GT PRO and from the power outlet.
IMPORTANT NOTES ABOUT CHARGING
• Only use with supplied power chager.
• If the GREEN light on your charger does not turn RED when you plug it into your kick
e-scooter, it could mean you have to check the cables to ensure you have a
proper connection; or that your TRIDENT GT PRO is already fully charged.
• Do not overcharge, as this will affect the life of the battery.
• The best charging temperatures are between 0°~ +35°. Extreme cold and extreme heat
will prevent your battery from charging fully.
• Make sure to unplug your charger before standing on or operating your kick
e-scooter, as this can be very dangerous.
• Use only the TRIDENT GT PRO charger that you received in your box.
• If the TRIDENT GT PRO is powered on when you enter the plug, the Battery
Indicator will begin blinking, if the TRIDENT GT PRO is powered o when
you enter the plug, the Battery Indicator will not blink.
NOTE
Only the indicator light on the charger will tell you the status of the battery
during charging.
10. Scooter Speci cations
• Wheels: 12", inflatable
• Max. speed: Max. 25 km/h
• Brakes: EBS Brake, Rear Disc Brake
11. Thank You
Thank you for the purchase of your new TRIDENT GT PRO, and thank for taking the time to read the User Manual. We hope that the information that you obtained
from this manual will help you safely operate, maintain and enjoy your TRIDENT GT PRO for years to come. We appreciate your consideration and sincerely hope you
enjoy and share your TRIDENT GT PRO experience with all of your friends, family members, and loved ones.
Thank you and welcome to the TRIDENT GT PRO movement!
ENJOY YOUR TRIDENT GT PRO!
• Motor: Brushless Motor, 350W
• Battery: 15 Ah (540 Wh)
• Max. Weight: 120 kg

9. Inspection, Maintenance, and Storage

Your TRIDENT GT PRO requires routine inspection and maintenance. This chapter
describes maintenance steps and important operating tips. Before you perform the
following operations, ensure the power and charging cable is disconnected.
Inspecting and Cleaning your TRIDENT GT PRO
Disconnect the charger and turn o your TRIDENT GT PRO.
Routinely check the body of the TRIDENT GT PRO and tires for damage or excessive wear.
Avoid using water or other liquids and cleaners on the TRIDENT GT PRO for
cleaning. Wet a clean cloth with clean soapy water, rinse the cloth thoroughly,
and wipe the body of the TRIDENT GT PRO making sure that water does not get
into the power button, charging port, the foot mats, or tires.
Battery maintenance and storage of your TRIDENT GT PRO
Fully charge your battery before storing.
If you are storing your TRIDENT GT PRO for an extended period of time, please fully
charge your TRIDENT GT PRO at least once every three month.
If the ambient temperature of the storage location is below 0°, please do not charge.
You must bring the TRIDENT GT PRO into a warmer environment before charging.
Check under Battery Information and Speci cations for more details.
To prevent dust from getting into your TRIDENT GT PRO, try wrapping it or
sealing it with its original packaging.
Store your TRIDENT GT PRO indoors, in a dry and suitable temperature.
NOTE
Users who disassemble the TRIDENT GT PRO will forfeit their right of warranty.
• LED lights: Front white light and rear red light
• Size (unfolded): 124 x 53 x 117 cm
• Size (folded): 124 x 53 x 58 cm
Battery Speci cations
Battery Lithium Battery
Voltage 36V
Initial Capacity 15Ah
Working Temperature 0° ~ +50°
Charging Temperature 0° ~ +35°
Storage Time 12 months
Storage Temperature 0° ~ +25°
Storage Humidity 5% - 95%
iconBIT Team
English 3/4