Winterising; Decommissioning; Spare Parts - Bayrol Flockmatic Betriebsanleitung

The hose of the dosing pump is replaced without dismounting
the rotor.
•
Remove the emptied suction and pressure hoses from the
hose holder. To do this open the blue clamping screws.
•
Take the transparent cover 1 off of the pump.
•
Take off the blue cover 2 of the rotor.
•
Turn rotor 3 in such a manner that the flat side points to the
left and is vertical.
•
Pull the hose holder 4 out of its holder and lift it on the left
side.
•
Now turn the rotor 3 clockwise and follow with the hose lifted
until it is completely free.
•
Proceed in the reverse sequence for mounting.
The hose only, or the hose together with the hose holder can
be replaced.
We recommend replacing the hose together with the hose
holder. (Replacement hose set)
Art.-no. Description
127402 Replacement hose Flockmatic
127403 Replacement hose set Flockmatic
NOTE
If only the hose is replaced, you must strictly
ensure the following when mounting the hose
• Firm seat of the hose on the nozzles.
• The hose must not be fitted on twisted under
any circumstances.
• You must ensure that the hose connectors
are firmly seated..

6.5 Winterising

For brief interruption of use (e.g. several days) no special
measures are required.
For longer interruptions of operation that extend over several
weeks, as in the case of winter care the following tasks must be
executed:
12
• Remove the suction lance from the canister and rinse it with
• Seal the delivery container, store it in a cool and dry
• Rinse the hose pump with water.
• Take the dosing hose out of the pump.
• Flush all hoses with water and empty them completely.
After the winter season, all components must be examined to
determine that they are functional. All dismounted parts must
be remounted at their intended position. Check the settings of
the Flockmatic

6.6 Decommissioning

If the device will be disposed of after its service life, it must be
flushed out and the water drained. The device has been
manufactured in accordance with the provisions of the ROHS
Directive and the Waste Electrical and Electronic Equipment
Directive. It does not belong in domestic waste.
Take the device to a suitable and appropriate collection point.
Art.-No.
127 400
171 212
/ Vario S
®
127403
/ Vario S
®
127402
100 509
171 008
water.
location and protect against UV radiation.
.
®

7. Spare parts

Picture Description
Flockmatic
®
Suction fitting, rigid
Replacement hose set
Flockmatic / Vario S
®
Pump hose
Flockmatic / Vario S
®
PE dosing hose 6x4x1
(10 m)
Injection Valve PVDF