Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. General safety instructions
This operating manual contains basic instructions that must be
complied with for installation, commissioning, operation, and
maintenance. Consequently this operating manual must always
be read by the fitter as well as the responsible owner prior to
installation and commissioning, and must be accessible to
every user of the device. In addition, all other safety
instructions in this document must be strictly complied with.
Read and comply with all instructions.
To reduce the danger of injury, do not allow children to use this
product.
Dangers due to failure to comply with the safety
instructions
Failure to comply with the safety instructions can result in
hazards for personnel as well as for the environment and the
device.
Failure to comply with the safety instructions can result in loss
of all claims for damage compensation.
DANGER!
Inadequate qualification of personnel
Dangers due to inadequate qualification of
personnel!
Possible consequence: Death or severe injury,
significant damage to material assets.
• The system owner must ensure compliance
with the required qualifications.
• All activities must only be carried out by
personnel who are qualified to perform such
activities.
• Access to the system must be prevented for
inadequately qualified personnel..
IMPORTANT NOTE!
Compliance
with
prevention regulations and the other statutory
regulations and the generally acknowledged safety
regulations must be ensured by the system owner!
IMPORTANT NOTE!
Only liquid flocculants from the company BAYROL
may be dosed with the Flockmatic
flocculants or other products from other
manufacturers results in loss of all damage
compensation claims!
10
the
applicable
accident
. The use of
®
DANGER!
Compliance with the protection rating
After tasks on the Flockmatic
individual cable glands are not properly closed, so
that a reliable seal is ensured, moisture can
penetrate into the device.
Possible consequences: Damage or
destruction of the Flockmatic
•
After all tasks performed on the device, ensure
a safe seal.
2. General
The Flockmatic
is a high quality peristaltic pump for dosing of
®
flocculant (Quickflock Automatic Plus) in to the circulation
system of a swimming pool.
The pool must be equipped with a properly sized sand/glass
filter.
3. Technical data
The Flockmatic
is a high quality stepper motor that requires
®
no gears.
Parameter
Supply voltage
Power consumption
Ambient temperature
Delivery capacity
Pression
Protection class - housing
Dimensions
(without mounting plate):
Weight
4. Electrical connection
The Flockmatic
pump must be connected in a way that it only
®
works when the circulation pump is running.
The Flockmatic
must be isolated when carrying out a
®
backwash
of the sand/glass filter.
installed in such a way to ensure that it is switched off during
Backwashing of the filter.
The Flockmatic
can easily be connected to the PoolManager
®
Please refer to the operating instructions of the PoolManager
, if the housing or
®
, malfunctions.
®
Value
230 V AC / 50/60 Hz
max. 10 VA
min. +10 - max. +45 °C
0,01 l/h (10 ml/h)
max. 2,5 bar
IP65
approx. 93,5 x 150 x 130 mm
(WxHxD)
1,2 kg
The Flockmatic
must be
®
.
®
.
®
Werbung
Inhaltsverzeichnis
