Proper Use; Technical Data - Kraissmann MS'560 Betriebsanleitung

▶ Inspect the equipment and accessories for transport
damage.
▶ If possible, please keep the packaging until the end of
the guarantee period.
Danger!
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils
or small parts. There is a danger of swallowing
or suff ocating!
▶ Petrol scythe mower
▶ Guide pin
▶ Operating handle
▶ Operating handle retainer
▶ Carrying strap
▶ Trimming blade
▶ Spool with nylon line
▶ Driving plate
▶ Pressure plate
▶ Pressure plate cover
▶ Nut M10 (left-hand thread)
▶ Measuring jug
▶ Spark plug wrench
▶ Allen wrench 4 mm
▶ Allen wrench 5 mm
▶ Protective hood for nylon line/trimming blade
▶ Original operating instructions
▶ Safety instructions

3. PROPER USE

The power scythe (using the cutting blade) is designed for
cutting young trees, strong weeds and undergrowth. The
power trimmer (using the line spool with cutting line) is
designed for cutting lawns, grassed areas and small
weeds. The operating instructions as supplied by the man-
ufacturer must be obeyed to ensure that the equipment is
used properly. Any use which is not expressly permitted
in the manual may result in damage to the equipment and
place the user in serious danger. Be sure to observe the
restrictions in the safety instructions.
Please note that our equipment has not been designed for
use in commercial, trade or industrial applications. Our
warranty will be voided if the equipment is used in com-
mercial, trade or industrial businesses or for equivalent
purposes.
Important. Due to the high risk of bodily injury to
the user, the petrol power scythe must not be used
to carry out the following work: to clean dirt and
16 | English
debris off walkways, or to chop up tree or hedge
clippings. Similarly, the petrol power scythe must
not be used to level out high areas such as mole-
hills. For safety reasons, the petrol power scythe
must not be used as a drive unit for other work
tools or toolkits of any kind.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer will
be liable for any damage or injuries of any kind resulting
from such misuse.

4. TECHNICAL DATA

Power type ........................................2-Stroke, air-cooled
Displacement, cc ...............................................................43
No load power, kW/HP .............................................1.4/1.9
Idling speed, rpm .......................................................... 3000
Feul tank capacity, l ........................................................1.2
Danger!
Sound and vibration
L sound pressure level ..................................... 97 dB(A)
pA
K uncertainty ............................................................... 3 dB
pA
L sound power level ....................................... 112 dB(A)
WA
K uncertainty .............................................................. 3 dB
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Functions
Vibration emission value a h = 3.5 m/s
K uncertainty = 1.5 m/s
2
Keep the noise emissions and vibrations to a min-
imum.
▶ Only use appliances which are in perfect working or-
der.
▶ Service and clean the appliance regularly.
▶ Adapt your working style to suit the appliance.
▶ Do not overload the appliance.
▶ Have the appliance serviced whenever necessary.
▶ Switch the appliance off when it is not in use.
▶ Wear protective gloves.
5. ASSEMBLY
5.1.1 Fitting the steady grip
Install the steady grip as shown in Figures 3a-3b. Do not
tighten the screws until you have set the perfect working
position with the carrying strap. The steady grip should
be aligned as shown in Figure 1. To dismantle, proceed in
reverse order.
2