Duravit SensoWash Classic Montageanleitung Seite 7

3 Requirements at the installation location
The toilet bowl is installed properly.
> Observe the separate mounting instructions.
4 Technical data
Electrical connection
Rated voltage
Rated power
Circuit breaker
RCD
Protection degree
Protection class
Cable specification
Water connection
Cold water
Water pressure
Water hardness
5 Mounting instructions
Installation possibilities
1
A: Concealed installation with wall-mounted toilet
B: Concealed installation with one-piece toilet
A is described as representative for other installation
possibilities.
Observe the mounting instructions
2
> Observe the separate mounting instructions.
+
27 36
> Check whether the product works properly.
> Observe the user manual.
CAUTION
Damage to health caused by dirty, polluted or long
standing water
Operating the shower functions with dirty, polluted or
long standing water can cause damage to health.
> If the product is NOT to be used for two weeks or more,
empty the product and switch it off (holiday mode).
MI
220 – 240 V, 50 – 60 Hz
1080 W
I = 16 A
N
I = 30 mA
N
IPX4
I
Supply line cross section
2
1 – 2.5 mm
(17 – 14 AWG)
DN 15 (½")
0.07 – 0.75 MPa
(10 – 109 psi)
Max. 2.4 mmol/l
(240 ppm)
70000839 59219 22.09.1
7