Device Use; Control Panel Operation - hillvert HT-IRI-07 Bedienungsanleitung

Water connection
•
. Before connecting the device to the tap, turn the function selector knob to OFF.
When connecting the device to the water installation, do not forget about the water
filter in the connector. Finally, connect the hose to the respective connector on the
bottom of the device.
Please note: Do not to use pliers, wrenches etc. to connect the device – there is a risk
of damage.
The device should be installed above the ground and vertically with respect to the
water tap.
3.3.

3.3.1. Control panel operation

Timer function knob
•

Device use