Oehlbach BTR Innovation 5.2 Bedienungsanleitung Seite 10

1. Press and hold the power switch
seconds, the display lights up and the device is switched
on.
2. Switch the page mode switch to the RX side
the device will enter RX mode.
3. The status sign on the device
display indicates a change from
„Connecting..." to „ Pairing..." (blue
light on the device flashes).
4. Plug the 3.5MM audio cable into the AUX port of the device
and the other end of the audio cable into the audio input of
your stereo or car stereo.
5. Turn on the Bluetooth function of your phone, click Search
Bluetooth Device, select the „BTR Innovation 5.2" device in
the Bluetooth list and connect it.
6. After successful con-
nection (the blue light
on the device lights
steadily), the display shows the name of the connected
device and the audio codec when playing music.
TX transmit mode
In transmit mode, the BTR Innovation 5.2 can be used with, for
example, a TV to wirelessly transmit audio to a Bluetooth device
such as Bluetooth headphones or a Bluetooth speaker.
1. Turn on the Bluetooth headphones or Bluetooth speaker and
put the respective device into pairing status.
2. Press and hold the power switch
5.2 for 3 seconds, the display lights up and the device is
switched on.
3. Switch the page mode switch to the TX side
the device will go into TX mode.
4. The status sign on the device display indicates a change
from „Connecting..." to „Searching..." (the blue light on the
18
of the device for 3
and
Device
status
Audiocodec
Name of the connected
device
of the BTR Innovation
and
EN
device flashes). Or double-click the
pairing button on the device
to quickly enter the searching
mode (blue light flashes on the device).
5. Plug the 3.5mm audio connection cable into the AUX port
of this unit, and the other end of the audio cable into the
audio output port of the TV or other audio equipment in
your home.
6. The device creates a list
of Bluetooth device names
that can be selected using
the up and down buttons on the device and selected using
the OK button.
7. After successful
connection (the blue
light on the device is
on continuously), the
display shows the name of the connected Bluetooth device
and the audio codec when transferring music.
Notes:
∙ Establishing a connection can take different amounts of time
for different Bluetooth devices, due to different protocols. If the
connection is not successful for a longer period of time, you can
restart the device and try to connect again.
∙ TX mode: The blue status light on the device flashes rapidly for
searching Bluetooth devices (such as Bluetooth headphones
or speakers).
∙ It is recommended to set the Bluetooth speaker or headset to
pairing status first, then start the BTR Innovation 5.2 and begin
pairing. This can improve the connection speed.
∙ If the audio does not sound normal (no sound, stuttering, noise)
after connecting to the Bluetooth device, you can double-click
the OK button to change the audio encoding to SBC.
Connecting two devices in TX and RX mode
Refer to the connection procedure above to connect to the Blue-
tooth device A (Bluetooth headset or speaker).
1. After Bluetooth device A
is successfully connected,
please turn on Bluetooth
Device
status
List of
Device names
Audiocodec
Name of the connected
device
Device status
19