Functions - Clearaudio Double Matrix Professional Sonic Bedienungsanleitung

Double Matrix Professional

5. Functions

5.1 Automatic cleaning
 Automatic / Superclean modes
The "Auto" button has a dual function. Pressing it once gives "Automatic mode". Pressing it
twice in quick succession starts the "Superclean mode", indicated by slow flashing of the blue
LED ring that surrounds the button. When either cleaning process (Auto or Superclean) has
completed, this will be indicated by the blue LED which will flash rapidly. You can cancel either
mode by holding down the "Auto" button for approx. 3 seconds.
5.2 Manual cleaning
 Power
Starts the platter rotating and switches on the sonic cleaning function.
 Liquid
Press to apply cleaning fluid to the upper and lower sides of the record.
 Platter
Press to change the platter's rotational direction.
 Platter Speed
Turn to adjust the platter rotation speed.

Vacuum
Activates the suction drying process while also stopping the sonic cleaning function.
5.3 Functions for both automatic and manual cleaning
 Antistatic brush
The antistatic brush arm is used to discharge any static that is
generated during the drying process.
Once the record is dry it should revolve through the antistatic brush for
at least 2-3 full turns.
To operate: while the platter is turning, swing the antistatic arm so that
it points towards the record's centre. After 2-3 complete turns, return it
to its rest position.
 LED level indicator
Shows the level of cleaning fluid currently in the reservoir (0% to 100%).
page /Seite 8
Sonic
User manual
Bedienungsanleitung
Fig. 3: Turning the antistatic unit
 clearaudio electronic GmbH 2015