Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use
Keep the device in good condition. Make sure that the moving parts are not blocked and all parts are in perfect
condition.
Before each use, check that the device's grille is properly attached and free of dust, dirt, etc.
Do not use the device when it is tilted or upside down and only with the base plate attached.
· Place the fan on a flat and stable surface. Use a suitable pad for sensitive surfaces.
· Ensure sufficient free space above and near the appliance to avoid overheating. Never cover it!
· Unwind the cable completely and connect the device to the mains.
· You can start the fan by pressing the speed buttons on the stand. You can adjust the speed at any time by
pressing the corresponding button.
· Press button 0 to stop the fan.
· After use always pull the plug from the socket.
Swivel function
To start the swivel function, push the button down. To stop it, pull the button up again. The appliance stops in the
current position.
Tilt angle
To adjust the tilt angle hold the stand firmly with one hand and with the other pull/push the grille by the handle
forwards/backwards. Caution: To avoid damage, do not use force.
Cleaning and care
· Always pull out the power cord before cleaning. Always wait until the device has come to a complete standstill.
· Do not use any sharp or pointed objects, benzine, solvents, scrubbing brushes or abrasive cleaning agents for
cleaning.
· Only clean the housing with a dry or, if necessary, a slightly dampened cloth. Afterwards dry off thoroughly.
· Do not clean the device in the dishwasher. Do not immerse it in water or any other liquid.
· Make sure that the device is completely dry before you use it again or put it away.
· Store the fan in a dry place protected from dust, moisture, heat and shocks.
14
Werbung
Inhaltsverzeichnis
