Cleaning & Maintenance - BORETTI SOFFITTO X 100 Gebrauchsanweisung

Procedure for generating a new code for the radio control:
The radio control is supplied with default codes. If you want to generate new
random codes you need to follow the procedure below: simultaneously press the
plus and minus keys for at least 10 seconds; the LED will turn on, then press the
two buttons again (within 3 seconds). The LED flashes three times to indicate that
the operation has been completed. Once you changed the radio control you must
run again the initialization procedure.
Cleaning and Maintenance
Warning Risk of electric shock!
• Penetrating moisture may result in an electric shock. Clean the appliance using a
damp cloth only. Before cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box. Risk of electric shock!
• Do not use any high-pressure cleaners or steam cleaners, which can result in an
electric shock.
Cleaning surfaces
To ensure that the different surfaces are not damaged by using the wrong cle-
aning product, follow the instructions in the table. Do not use any of the following:
• Harsh or abrasive cleaning agents, e.g. liquid scouring cleaner,
• Cleaning products with a high alcohol content,
• Hard scouring pads or cleaning sponges,
• Pressure washers or steam cleaners,
• Cleaning products that dissolve limescale,
• Aggressive all-purpose cleaning products,
• Oven spray.
--> Stainless steel
Hot soapy water: Clean with a dish cloth and then dry with a soft cloth. Clean stainless
steel surfaces in the direction of the grain only. Special stainless steel cleaning products
are available from our after-sales service or from specialist retailers. Apply a very thin
layer of the cleaning product with a soft cloth.
--> Painted surfaces
Hot soapy water: Clean using a damp dish cloth and then dry with a soft cloth. Do not
use stainless steel cleaner.
--> Aluminium and plastics
Hot soapy water: Clean with a soft cloth.
--> Glass
Glass cleaner: Clean with a soft cloth. Do not use a glass scraper.
30