Technical Specification - TERMOFOL TF-1000WIFI Einbau- Und Betriebsanleitung

Introduction
To get the most out of your new heater, please read through these in-
structions and the attached safety regulations before use. Please also
save the instruction manual in case you need to remind yourself of the
heater's functions at a later date.

Technical Specification

Details
Voltage
Frequency
Power
IP Waterproof
Important
Before plugging the unit into the mains, ensure by visual inspection
that the unit is intact and has not suffered any damage during transit.
Caution
The appliance must be always placed on a flat and stable surface. In
order to avoid a hazard due to inadvertent resetting of the thermal
cutout, this appliance must not be supplied through an external swit-
ching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
For your own safety
1. Read all instruction before using the heater.
2. Only connect the heater to a single-phase socket with a mains voltage as spe-
cified on the rating plate.
3. Do not leave your home while the appliance is in function: ensure that the
switch is in OFF (0) position and the thermostat is in minimum position. Always
unplug the appliance.
4. Keep combustible material such as furniture, cushions, bedding, paper, clothes,
curtains etc. at least 100cm away from the heater.
5. Do not hand anything on or in front of the heater.
6. Always use the heater in an upright position.
7. Do not place the heater against walls, furniture, curtains, etc.
8. Do not use the appliance in rooms less than 4 m² area.
9. Always unplug the heater when not in use. Do not pull the cord to unplug the
heater.
10. Keep the air inlet and outlet free from objects at least 1m in front and 50 cm
behind the heater.
TF1000WIFI
220-240V~
50/60Hz
500/1000W
IP24
TF1500WIFI
220-240V~
50/60Hz
750/1500W
IP24
TF2000WIFI
220-240V~
50/60Hz
1000/2000W
IP24