Yamaha DR2E17 Benutzer-/Betriebsanleitung Seite 17

!
SAFETY CONSIDERATIONS
SAFETY PRECAUTIONS
1
DURING MAINTENANCE
When performing maintenance, follow
2
all safety instructions contained in the
manufacturer's operation and service
manuals, as well as the following
safety procedures:
3
Properly immobilize golf car before
l
beginning any maintenance to avoid
any unexpected vehicle movement.
4
Properly block chassis before
l
working underneath golf car to
avoid any unexpected vehicle
5
movement.
When working on the battery, do
l
not smoke, or allow any sparks or
6
open flames near the vehicle, to
avoid any fires or explosions.
Before working on an electric golf
l
car, disable the car's electrical
7
system in accordance with the
manufacturer's instructions to avoid
electrical shock or damage to the
8
electrical system.
Use only properly insulated tools
l
when working on electrically
powered golf cars or around
9
batteries to avoid electrical shock or
damage to the electrical system.
Maintain all safety devices including
l
10
brakes, steering mechanisms,
warning devices and governors, in a
safe operating condition. Do not
modify these safety devices as
11
supplied by the manufacturer.
After each maintenance or repair,
l
the car must be driven by a
qualified, trained and authorized
person – in an area free of
pedestrian traffic – to ensure proper
operation and adjustment.
3-3
Record all maintenance performed
l
in a maintenance record log by
date, name of person performing
maintenance and type of
maintenance. Periodically inspect
maintenance log to ensure
accurate and complete entries.
Provide operator comment cards
l
to assist in identifying non-periodic
maintenance needs for specific
golf cars.
Maintain in a legible condition all
l
nameplates, warnings and
instructions provided by the
manufacturer.
If new nameplates, warnings or
l
instructions are needed, contact
your Yamaha Golf-Car Company
dealer.
STORAGE AND
BATTERY CHARGING
Take the following precautions to
ensure maintenance worker safety:
Only use battery charging facilities
l
and procedures that are in
accordance with applicable
ordinances and regulations to
avoid explosions, electrical shock
or damage to the electrical sys-
tem.
Periodically inspect charging
l
facilities and procedures to be
certain that applicable safety
codes, regulations and
procedures are being followed to
avoid any fires or explosions.
J0C