Get Started - Dupray bloom Bedienungsanleitung

EN

Get started

Choose the proper placement
1
Place the Bloom™ in an upright position on the floor in your room. We recommend installing the
unit in a space that is less than 1,517 sq.ft./141 m2 to maximize effectiveness. Make sure to place
the unit where it won't be knocked over by any person or pet in the household.
Room size
1,517 sq.ft.
758.5 sq.ft.
316 sq.ft.
Make sure the unit is more than
12 in./30 cm away from any
other object or walls.
Do not place the unit near
sources of heat, such as
radiators, fireplaces, or ovens.
Do not place the unit outdoors.
Install the antibacterial pre-filter
2
Place the pre-filter at the base
of the upside down unit.
8
Air exchanges per hour
1x
2x
4.8x
Pull the pre-filter up to cover
the base section.
Time
1 hour
30 minutes
12 minutes
Place the unit where air can
circulate freely in, out, and
around the unit.
Do not place the unit near
wet areas such as bathrooms,
greenhouses, or laundry
rooms where it may come into
contact with water.
When properly installed, the
pre-filter will be flush and kept
in place by the indent.