Replacing The Hepa Filter - Dupray bloom Bedienungsanleitung

EN

Replacing the HEPA filter

The HEPA filter should be replaced after every 6-8 months of use or when the filter change indicator
turns ON. You may need to replace your filter sooner or later depending on how often you use your
air purifier. Using the unit in an environment with relatively high pollution may mean you will need
to replace the filter more often, even if the filter change indicator is OFF.
Change the filter if you notice :
• Increased noise when the air purifier is on.
• Decreased airflow.
• Unusual odors.
• A visibly clogged filter.
1
Flip the air purifier upside down.
3
Unclip the 2 clips and remove the cover.
16
When it's time to replace the HEPA filter, the filter replacement indicator
located on the control button will blink red.
Note : Remember to reset the filter change alert after replacing the HEPA filter.
Before attempting to change
the HEPA filter :
• Turn the unit OFF and unplug.
• Remove the pot and plant.
• Remove the pre-filter.
2
Open the filter section by turning
counterclockwise. Lift, and remove
the HEPA filter.
4
Remove the old filter and install a new
HEPA filter on the filter frame.