The Product; Key Product Features; Dimensions; Assembly - Swedstyle Memory S Handbuch

6 Swedstyle Memory S - EN
WARNING. Risk of death or serious injury in explosive atmospheres
Operating the hand control in potentially explosive atmospheres may lead to death or serious
injury through explosions.
• Read the relevant directives to determine if an atmosphere is potentially explosive
• Do not operate the hand control in potentially explosive atmospheres
CAUTION. Risk of minor or moderate injury through tripping
During assembly and operation, poorly routed cables may become a trip hazard. Tripping over
cables may lead to minor or moderate injury.
• Ensure that the assembly area is kept clear of unnecessary obstructions
• Ensure that cables are routed properly to avoid trip hazards
• Be careful not to trip over cables
CAUTION. Risk of minor or moderate injury through crushing
If any key of the hand control becomes stuck while the system is in motion, the system may not
stop properly. This may lead to minor or moderate injury through crushing.
• Disconnect the system immediately if any key of the hand control becomes stuck
3

THE PRODUCT

3.1 Key product features

1
Mounting points
UP/DOWN keys 2
4 Memory position keys 3
4
SAVE
Display 5
90
120

3.2 Dimensions

Length 90 mm
Width 120 mm
Height 26 mm
20
9
26
45°
11
4

ASSEMBLY

CAUTION. Risk of minor or moderate injury through improper handling
Improper handling of the product during assembly may lead to minor or moderate injury
through cutting, pinching, and crushing.
• Avoid contact with sharp edges
• Be careful while handling tools that may cause personal injury
• Ensure assembly complies with the generally accepted standards and guidelines of
electrical engineering and furniture manufacturing
• Read all instructions and safety advice carefully
NOTICE
• Ensure proper ESD handling during assembly. Damage that can be attributed to
electrostatic discharge will void warranty claims
• To avoid damage to the product, measure the dimensions of the hand control before assembly
• Before assembly, all parts must be acclimatised to the ambient conditions
• Do not lift the hand control by its cable. This will cause irreparable damage to the product
INFO Perform a product risk assessment so that you can respond to potential residual hazards.
Assembly instructions must be included in your end user operating manual.
Swedstyle Memory S - EN 7
90
120