Chicco Chairy Gebrauchsanleitung Seite 13

• Do not leave on booster seat small
objects that can be swallowed by
children.
• Do not use the booster seat in
proximity of curtain cords, win-
dows or heat sources.
• Never use the product as a swim-
ming aid or floating chair in a
swimming pool.
• Do not use the booster seat posi-
tioned directly on the floor.
• Prolonged exposure to direct
sunlight may cause the products
colour to fade. After prolonged
exposure of the product to high
temperatures, wait a few minutes
prior to putting your child in it.
• Opening, adjusting and closing
operations of the booster seat
must be carried out exclusively by
an adult.
• WARNING: During the opening
or closing operations, make sure
that your child is at a safe distance.
During adjusting operations, make
sure the moving parts of the chair
booster seat do not come into
contact with the child's body.
• WARNING: The use of the safety
harness with fabric crotch strap is
essential to guarantee the safety
of your child.
• WARNING: the activity tray alone
does not guarantee the safety of
your child. Always use the safety
harness!
• Do not open and close the booster
seat when the child is sitting on it.
• When not in use, the booster seat
must be kept out of the reach of
children.
TIPS FOR CLEANING AND MAINTENANCE
The cleaning and maintenance of the product must
only be carried out by an adult. Periodically check the
booster seat for broken, damaged or missing parts: do
not use it in this case. Clean the plastic parts with a
soft damp cloth.
Wash by hand in cold water
30° C
Do not bleach
30° C
Do not tumble dry
Do not iron
Do not dry clean
FIRST ASSEMBLY AND INSTALLATION
1. Rotate the rear leg externally until you hear it "click"
into place (Fig. 1).
2. Rotate the seat "B" until you hear it "click" into place
(Fig. 2).
3. Adjust the height of the seat by pushing the seat
upwards, being sure to keep the front support tube
from moving (Fig. 3).
4. Attach the backrest "A" to the lateral tubes push-
ing the metal pins until your hear them click into
place (Fig. 4).
5. Cover the backrest with the fabric (Fig. 5) and fasten
the buttonholes of the fabric to the plastic pins lo-
cated on the rear of the backrest "A" (Fig. 6).
6. Assemble the tray "F" by attaching the mobile
extremities of the tray to the attachment supports
"G" until you hear them click into place (Fig. 7).
Next, lift the tray "F" and insert the crotch strap "I"
in the appropriate slot until you hear it click into
place (Fig. 8).
7. The booster seat can be adjusted to 4 different
heights; to adjust the height of the seat, simply
take hold of the backrest "A" and pull upwards (Fig.
9). To lower the seat height, press the seat height
adjustment buttons "O" and release them upon
reaching the desired height (Fig. 10). A "click" will
be heard for each position, confirming that the
seat has correctly locked into place at the desired
height.
WARNING: Always conduct these operations after
having removed the child from the booster seat.
WARNING: Check that both sides have locked in
place at the same height.
8. Place the booster seat on the chair; to use this
product, check that the chair has the minimum
sizes indicated in Fig. 11. Attach the rear fastening
straps "M" having them pass behind the backrest
of the adult chair (Fig. 12) and the lower fastening
straps "N" under the seat of the adult chair (Fig.
13). Be sure you hear the "click" confirming that it
has locked into place correctly. Pull the free end of
the lower and rear straps to adjust the length until
they are properly tightened and the chair booster
seat is securely fastened in place (Fig. 14).
9. Once the chair booster seat is fastened securely to
the seat and backrest of the adult chair, you can
place your child in it as follows:
a. Release the prongs of the three-point safety har-
13