Pepita SmileHOME SFC001 Gebrauchsanweisung Seite 2

1.Door opening
In common mode, enter the correct password and fingerprint (any fingerprint can be used for
the first time). The voice prompt "Verification passed" is played, and the safe box opens.
2.Function description of setting operation keys
Press the red button behind the door and hear the voice prompt "Please enter the
management password", which is "123456" setting in the factory. Press the "#" key to confirm,
and the voice prompt will appear:
To set the user password, press "1"!
To add a fingerprint, press "2"!
To delete the user fingerprint, press "3"!
To set the management password, press "4".!
To set the door opening mode, press "5"!
To exit, press the "*" key!
3.Setting a User Password
After press "1", voice prompt "please enter the password", enter 4 to 12 digits password, press "#"
key to confirm, voice prompt "please enter again", please enter same password as first time, if
the voice prompt "set success", set up complete and return to the main program, if prompt
"enter error, please enter again", please enter the password that was like the first time.
4.Adding a Fingerprint
Press "2", voice prompt "please press your finger", and the light will turn on, put your finger on
the light, after success, you will hear voice prompt "registration success", if not, you will hear
two beeps and return to the main program.
5.Deleting a Fingerprint
Press "3", the voice prompt "all deleted successfully", if not successful, you will hear two beeps
and return to the main program.
6.Setting the Management Password (Default: 123456)
Press "4", voice prompt "please enter the administrative password", enter 4 to 12 digits
password and press "#" key to confirm, voice prompt "please enter again", please enter the
same password as first time, if the voice prompt "set success", set up complete and return to
the main program, if prompt "enter error, please enter again", please enter the password.
7.Setting the Door Opening Mode (Default: Common mode)
Press "5". The voice prompt "For common mode, press 1. For safe mode, press 2." To exit, press
the "*" key. If no operation is performed within six seconds, the system automatically exits the
management mode. Press the "*" key to return to the upper- level menu.